<em id="dlzxl"><pre id="dlzxl"><dl id="dlzxl"></dl></pre></em>

      <address id="dlzxl"></address>

        <address id="dlzxl"><listing id="dlzxl"></listing></address>

          English | 添加收藏 | 設為首頁
          您所在的位置:網站首頁 > > 產品中心 > XLPE絕緣材料 > 化學交聯絕緣料10KV及以下化學交聯黑色聚乙烯架空絕緣料 YJW-10
          10KV及以下化學交聯黑色聚乙烯架空絕緣料 YJW-10
          Chemical Cross-Linkable PE Overhead Insulation Black Compound (≤10KV) ...
          型號:0

          參考價:¥

          說明:如您對該產品感興趣,請在此輸入您的手機號將本產品的地址 發送至您手機上。

          Product description 產品描述
          Chemical cross-linkable PE insulation black compound for power cables which regard advanced LDPE resin as the main material, add antioxidant, cross-linking agent and other accessory additives, is manufactured by advanced closed extruder. It has excellent extrusion property and physical property, impurity content is controlled within limits. This product is mainly used for the insulation of medium-low voltage cross-linking overhead cables. Working temperature is 90℃.It is applicable for 10KV and below cross-linking cables.
          電力電纜用黑色可化學交聯聚乙烯絕緣料是以優質低密度聚乙烯樹脂為主要原材料,加入抗氧劑、交聯劑等配合劑,采用先進的封閉式混煉裝置加工而成,它兼有良好的擠出性能和物理性能,雜質含量符合要求,專用于生產中、低壓交聯架空電纜絕緣,長期工作溫度為90℃,本產品適用于10KV及以下交聯電線電纜。
           
          Processing Indicator 加工工藝
          Recommend to process with the PE extruder. 建議使用聚乙烯專用擠出機進行加工。


          Model
          牌號
          Machine Barrel Temperature
          機筒溫度
          Molding Temperature
          機頭溫度
          YJW-10 100-115℃ 110-115℃

          Physical and Electrical Properties 物理和電氣性能
          Item
          試驗項目
          Unit
          單位
          Technical requirements
          技術要求
          Tensile Strength
          拉伸強度
          MPa ≥13.0
          Elongation at Break
          斷裂伸長率
          % ≥300
          Brittle Temperature with Low Temperature
          低溫脆化溫度
          -76
          20℃Volume Resistivity
          20℃體積電阻率
          Ω·m ≥1.0×1013
          20℃Dielectric Strength,50Hz
          20℃介電強度, 50Hz
          MV/m ≥22.0
          20℃Dielectric Dissipation Factor,50Hz
          20℃介質損耗因數, 50Hz
          --- ≤0.001
          Resistance to Environmental Stress Cracking F0
          耐環境應力開裂F0
          h ≥1000
          Air Aging Condition
          熱空氣老化條件
          135℃×168h
          Tensile Strength Variation After Aging
          拉伸強度變化率
          % ±20
          Elongation Variation After Aging
          斷裂伸長變化率
          % ±20
          Artificial Weathering Aging
          人工氣候老化0-1008h
          Tensile Strength Variation After Aging
          拉伸強度變化率
          % ±30
          Elongation Variation After Aging
          斷裂伸長率變化率
          % ±30
          Artificial Weathering Aging
          人工氣候老化504-1008h
          Tensile Strength Variation After Aging
          拉伸強度變化率
          % ±30
          Elongation Variation After Aging
          斷裂伸長率變化率
          % ±30
          Hot Set Test Condition
          熱延伸試驗條件
          200℃×0.2MPa×15min
          Hot Elongation
          負荷下伸長率
          % ≤80
          Permanent Deformation After Cooling
          冷卻后永久形變
          % ≤5

          中文字幕偷乱视频在线,四色永久访问本站,亚洲欧美日产第一区-日本一本二本三本av网站^&